Electrical wiring
[edit] Introduction
Electrical wiring is defined in the IET Wiring Regulations (BS 7671) as ‘wiring systems’, with the following definition:
‘An assembly made up of cable or busbars and parts, which secure, and if necessary, enclose the cable or busbars.’ |
Wiring as a term in such instances is usually taken to mean ‘cabling’ and the installation of cables within a building.
[edit] Cables and cabling
A cable, in the context of electrical installations in buildings, is an insulated conductor of electricity, usually copper or aluminium, with a protective casing which acts as an insulator. Cables are used to transmit electrical energy or data or telecommunications signals from one point to another.
The usual attributes of an electrical cable include:
- They are flexible enough to be drawn through or laid into a containment system.
- Where appropriate, they can be clipped directly or suspended from a building’s structure.
Flexible cables (often simply called flex cables), comprise finer strands of conductor material, and are used where regular movement or articulation is expected that could damage regular cables.
Cable insulation materials may comprise common plastics such as polyvinyl chloride (PVC), modified synthetic materials, or rubber. Other forms of insulation include mineral powder housed within a metallic outer casing.
The way different cables behave when subjected to fire conditions is the subject of extensive research. Toxic gas emissions, density of smoke and fire propagation speeds can vary widely with different forms of cable. This is a key consideration when selecting materials for buildings.
Since 2017, cables marketed and made available in the European Union (EU) must carry a ‘Euroclass’ classification, categorising their reaction to fire conditions.
--ECA
[edit] Related articles on Designing Buildings
- Arcing.
- Articles about electricity.
- Earthing.
- ECA articles.
- Electric.
- Electrical appliance.
- Electrical conduit.
- Electrical consumption.
- Electrical energy.
- Electrical equipment.
- Electrical installation.
- Electrical power.
- Electrical safety.
- Electrician.
- Electricity bill.
- Electrotechnical Assessment Specification guidance for installers.
- Grommet.
- IET announces release of 18th Edition Amendment 2.
- Panelboard.
- Premises wiring system.
- Ring circuit.
- Safe isolation for low voltage.
- What to know about foundation earthing.
Featured articles and news
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Tackling the lack of knowledge or confidence in heat pumps
The CICV Green Home Festival part of the Edinburgh Fringe.
Home improvements swapped for green energy upgrades
As applications down since and desire to reduce bills up.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
The Use of Natural Insulation Materials in Retrofit
New paper from STBA with support from SDF.
National Retrofit Hub in partnership with InstallerSHOW.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Building Safety recommendations and Northern Ireland
The NI roadmap to improving safety in high rise residential.
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.